Oil system sealants Abro SS-822

For gasoline and diesel engines with and without turbocharging, as well as for engines operating on liquified gas. The modified liquid glass enhanced with pure copper for cold welding of holes and cracks in the engine. It efficiently seals joints of the cylinder block, radiator, gasket of the cylinder block head, plugs for anti-freeze drain. It forms a super-strong protective film, resistant for high temperatures, vibration, and pressure. It eliminates the necessity of expensive capital overhaul of the engine, which takes much time. APPLICATION. 1. Drain the cooling fluid and pour the water inside. The engine should run in the idle mode until it warms up to the operating temperature. 2. Thoroughly shake the sealant and pour it into the radiator. 3. Close the radiator cap and let the engine run in the idle mode during 15 minutes or until the leakage stops. 4. Drain water with the sealant from the cooling system and pour the coolant or anti-freeze into the system to the necessary level. Never add into the radiator with a low water level. Composition: distilled water, sodium silicate, water solution, copper powder, sodium nitrate.