Radicool NF Castrol 158A60

Castrol Radicool NF is a concentrated coolant based on mono-ethylene-glycol with specially selected additives, without inhibitors containing nitrites, amines and phosphates. It is made using the hybrid technology for modern engines of cars and trucks. This coolant is recommended for use in the concentration from 33% to 50% diluted with distillated water in order to get optimum protection from corrosion. In such a case, freezing temperature will be in the interval from -18°C to -36°C. Application. Castrol Radicool NF is developed according to increasing requirements of manufacturers of engines and cars to highly efficient coolants which minimally impact the environment. It ensures excellent protection from corrosion and as it is phosphate-free, it eliminates deposits which can be present in some modern engines. Besides, it protects from corrosion in low temperatures. Use of the anti-freeze in the recommended volumes significantly reduces possible pitting of the wet cylinder sleeve due to cavitation erosion. Cavitation erosion is caused by broken air bubbles present in the coolant which adhere to the outer sleeve surface. These bubbles burst and as a result remove insufficient amount of sleeve material particles. If it continues, it will lead to formation of pores in the sleeve material and a serious engine malfunction. It can be used in the cooling system for up to 3 years. It is excellent protection in low temperatures. It provides perfect protection against corrosion. Efficient water pump lubrication. It is compatible with traditional seals and materials of hoses used in the engine cooling system. It comprises a bitter taste additive to prevent accidental swallowing. It has approvals of various car and equipment manufacturers. In the most cases, coolants are not compatible and must not be mixed without direct instruction of the equipment manufacturer. If Castrol Radicool NF is used for the first time, flush the cooling system with clean water. It is recommended for use according to the following specifications: BMW N 600 6910; Opel/Vauxhall B040 0240; Volvo 1286083; Jenbacher TA-NR1000- 0201 Approvals and specifications: ASTM D3306; ASTM D4985; JIS K2234; MAN 324 Typ NF; MTU MTL 5048; VW TL-774C (G11); MB-325.0; Deutz TR 0119-399-1115