ANTIFREEZE Fill inn FL038

FILL Inn red anti-freeze is made by the CHELSEA LONG LIFE antifreeze -40 formula and is used in engine cooling systems of all brands of local and foreign cars and household cooling (heating) systems. It does not comprise buffer-forming salts (bores) that is why it has a low alkalinity value which ensures a longer operation period: 5 years or 250 000 km of the mileage. The anti-freeze is equipped with the optimum additive package which protects the engine from freezing and overheating; prevents corrosion of steel, cast iron, copper, brass and aluminum surfaces; does not negatively impact rubber, plastic and paint-and-lacquer surfaces; prevents scaling on inner surfaces of the cooling system which is especially important to maintain the optimum heat mode, ensure normal thermostat and water pump operation; it ensures reliable lubrication of movable parts of the water pump and prevents foaming. Its fluorescent property helps quickly detect the leakage. It is compatible with all modern coolants based on ethylene-glycol and organic corrosion inhibitors, including G11 and G12. Application: Drain the coolant earlier used in the engine. Flush the cooling system with the mixture of water and flushing fluid (FL022 is recommended for use). To do this, pour it into the system, start the engine, switch the heater on the full power, warm up the engine to its operating temperature, stop it, let it cool down. Drain the flushing mixture. Pour FILL Inn anti-freeze into the system. Start the engine, switch the heater on the maximum power, warm up the engine to its operating temperature, stop it. Check the coolant level, top it up if it is necessary. Do not store under the direct sun rays! It meets ASTM D 3306 (USA) international standards. British Standart 6580.JISK 2234.CUNA NC 956-16.AFNOR R-15-501.O NORM V 5123.UNE 25-361.NATO S-759.VW, BMW, Mercedes Benz, VOLVO, FORD, GM, FIAT. It complies with the requirements of GOST 28084.