Additives for oil systems Bardahl 1030B

Bardahl Maxi Compression additive 9s developed to improve viscosity parameters of motor oils at high temperatures and to restore the engine compression. Thanks to the special 2-in-1 formula, Bardahl Maxi Compression prevents and stops oil leaks caused by dried old engine gaskets. It is especially recommended for engines with high mileage and in case of the following issues: Loss of the oil compression and pressure. Power drop at high revolutions. Excessive oil consumption. Oil leaks. Increased engine noise and excessive wear. It is mixed with all types of 4-stroke oils, suitable for all types of gasoline, diesel, gas engines. It is compatible with the catalytic converters and particulate filters. Bardahl Maxi Compression impacts the oil viscosity at high temperatures and seals the gaps between the pistons and cylinder walls and between the valve stem and guide. It restores and evens the cylinder compression. It restores elasticity of gaskets and joints dried and hardened due to big temperature fluctuations. It eliminates oil leaks without disassembly. It reduces oil consumption. It improves engine operating parameters. It reduces noises during operation. Maxi Compression formula reinforces the oil film at high temperatures and protects worn out parts of moving mechanical units (pistons, cylinder shafts, crankshaft, camshaft, linings...). Application. Add 1/2 of the can in the crankcase of the warmed-up engine in case of normal operation conditions and medium wear. In case of increased loads and the heavily worn-out engine - up to 1 can during the oil change or top-up.