Tyre sealants Abro QF25

Tyre filler. It is used for quick repair and inflate of punctures tyres. It automatically balances the wheel. Tyre pressure reaches 2.4 atm after the filler is applied. It is the most efficient for tubeless tyres, but can repair small punctures in tubes as well. Application: Turn the wheel with its nipple down. Thoroughly shake the bottle (at the temperature below 0°C, preliminary warm up the bottle to the room temperature using a heater nut not near open flame). Screw the plastic tube on the tyre nipple without opening the control valve. Remove the cap, hold the bottle vertically, and press the button. Spray the whole bottle of the tyre filler into the tyre (it takes about 1 minute). Disconnect the bottle and drive 2 - 3 km on a low speed immediately to let the tyre filler evenly spread over the tyre. After that, check the pressure in the wheel and adjust it to the normal if needed. Wheels with damaged spools, large tube and tyre damages, lateral punctures can’t be repaired with a tyre filler. It is not recommended for motorcycles, bicycles, etc.