Carburetor cleaners Wynn's W51041

Carburettor Cleaner. It removes dirt and deposits from a carburetor without its disassembly. Properties: It removes sedimentation, lacquer and dirt from the carburetor, gasoline pump and inlet system. It eliminates inconsistent idle run and poor start. It allows you to conduct more accurate carburetor alignment. It reduces CO and CH in exhaust gases. Application: For all types of carburetors. Instructions: Warm up the engine. Disconnect the supply fuel pipe before the gasoline pump, put the suction hose from the gasoline pump into the can with Carburettor Cleaner Liquid, i.e. use the can as the gasoline tank. If there is a return fuel pipe, it should be also connected to the can. Start the engine. Use all the fluid (on the idle run mode). Re-connect the removed fuel pipes and align the carburetor (if necessary) according to the manufacturer’s instructions. Carburator Cleaner Liquid is recommended to be used together with Carburettor Cleaner Spray. For this, remove the air filter and use Carburettor Cleaner Spray to clean air channels, diffusers and check screws.