Oil system cleaners Motul 102177

Engine flushing. Additive added in old oil before its replacement. For 4-stroke motorcycle engines. Application. MOTUL Engine Clean Moto is used for all types of gasoline engines: injected, carbureted, turbocharged, naturally aspirated, with and without a catalyst, run on leaded and unleaded fuel. It allows you to efficiently remove dirt and deposits from the engine, dissolve them to the micro-particles, convert in suspended condition and drain together with the old oil. It additionally ensures multi-level lubrication during engine cleaning. Features. MOTUL Engine Clean Moto added in the motor oil before replacement allow the following: Reduce wear; reduce oil and fuel consumption; increase compression and even compression in cylinders; reduce amount of hazardous emissions; drain deposits, lacquer and other combustion products from problematic areas such as hydraulic lash adjusters, valves, valve oil seals, etc. It allows you to achieve the maximum performance of the newly added oil. It extends the service life of the catalyst. Application. Add one dosage of MOTUL Engine Clean Moto in old oil of the warmed-up engine before each oil change. Let the engine run in the idle run mode within 15 minutes. Drain the old oil and replace the oil filter. One dosage of MOTUL Engine Clean Moto is enough for up to 5 liters of oil. In case of a big oil volume, add 60 ml of MOTUL Engine Clean Motot for each additional liter. If the engine is too dirty, do not increase the dosage but conduct the procedure twice. Application. MOTUL Engine Clean Moto is compatible with MOTUL Fuel System Clean Moto and reduces hazardous emission (reduced CO2, etc.). It is specially recommended before the maintenance service.