Additives for oil systems Bardahl 1010

Reduced wear and even compression on engines with increased oil consumption. Bardahl #2 additive contains polymers which increase oil viscosity at high temperatures which allows you to significantly reduce oil consumption and ensure stable minimum allowed pressure in the lubrication system. It reduces friction between parts, wear and operation noise, decreases or fully stops smoke. It is used in gasoline, diesel and LPG engines. It can be mixed with synthetic, semi-synthetic and mineral oils. It does not deteriorate catalytic convertors of exhaust gases. Application: Add Bardahl #2 additive in the warmed-up engine with fresh oil at each oil replacement or as top-up. To achieve the full effect, 1 (one) bottle or 10% of the additive from the engine lubrication system volume is enough. It is permitted to use 2 (two) bottles or 20% of the additive from the lubrication system volume for gasoline engines with bigger wear. For diesel engines — not more than 10% of the additive from the lubrication system volume. One bottle of the additive is designed for the 6 liters. It is recommended for engines with higher mileage and with engine operation issues.