Oil system cleaners Xado XB 40151

A fast-acting product for releasing stuck piston rings of gasoline and diesel engines. It removes all soot and resin deposits from the cavities of the cylinder-and-piston group. It does not require motor oil replacement after application. Application. 1 stage: Warm up the engine. The engine must be warm but not hot. 2 stage: Unscrew the plugs (nozzles). Disconnect the socket of the ignition distribution sensor, Hall sensor and switchboard. 3 stage: Add the compound of 1 tube in each cylinder one by one. Screw the ignition plugs again. Wait for 20 - 20 minutes. Unscrew the ignition plugs. Cover the plug holes with absorbing fabric to prevent discharged dirt fall on the paint. Rotate the engine with the starter within several seconds. 4 stage: Install the plugs (nozzles) on their places. 5 stage: Start the engine and ensure its operation at the increased crankshaft rotation within 15 minutes. Residues of the softened coke will be removed through the exhaust gas emission system. Dosage: 1 tube - 1 cylinder. Remarks. Avoid product contact with the paint-and-lacquer coatings. It is safe for catalytic convertors, oxygen sensors, rubber parts and seals. It can be used for engine oil system flushing: Add the product in the oil filler of the warmed-up engine in the proportion 40 ml for 3 - 5 liters of oil. Ensure engine idle run within 10 - 15 minutes. Replace the oil and the oil filter.