Cleaner for e-contacts CRC 10.151.1.11.12.58

CRC PRECISION CLEANER, a cleaner for electrical contacts. Efficient cleaner for electronic parts. CRC PRECISION CLEANER is an efficient fine-refined cleaning solvent meeting modern ecological requirements. The product is based on quickly drying naphthenic solvents without chlorine, alcohol and ether-glycerine components. CRC PRECISION CLEANER improves technical properties and enhances reliability of electric and electronic equipment, quickly and efficiently cleans contacts and components. It prevents damages of the contacts by dissolving and/or removing dirt which absorbs moisture and causes corrosion and sparkling. It quickly removes residues of solder, light oils, fingerprints and other contaminants. It does not damage the ozone layer (the index of ozone layer damage = 0.00). It extends the service life of the components in case of regular application. It is non-conducting and non-corrosive. It fully evaporates and does not leave sediment. It is safe for most plastic, rubber and painted surfaces. Before the use, apply the product first on small area when it is used on sensitive plastic and glued parts under pressure. The aerosol is under pressure of the finely refined propellent CO2 which allows you to use the full bottle volume on 97%. The aerosol bottle has a convenient valve (it works in any position of the bottle). Application: CRC PRECISION CLEANER. It is ideally suitable for cleaning when there is possibility to use solvents with a low inflammation temperature: relays, switches, contact breakers, sensors, contacts, plugs, joints, terminals, generators. Engine control units. Alarm and emergency systems. Print boards. Laboratory and testing equipment. Plug adapters and sockets. Electromechanical units. Instructions for application: CRC PRECISION CLEANER. Apply a large amount of the product on the surface and let it drain. Use a special additional applicator for better penetration. Highly flammable product. Do not spray on running electrical equipment and devices; switch off the equipment, turn off the indicator lights, heaters and extinguish open fire before application. Combustible vapors can be formed while applying, especially in closed rooms. Use the product in well ventilated places and maintain proper air circulation until the vapors are fully removed. Let the surface dry before turning on the system again. Be especially careful when using the product to clean sensitive plastic materials, as well as glued items and items under pressure.