Anti-corrosive compound Fill inn FL019

It reliably protects external car surfaces from corrosion (underbody, sills, door frames, stands, side bars, etc.). It suspends the started rusting process. It can be used for anti-corrosive treatment of internal car surfaces. It removes water from gaps and joints between body panels, protects from formation of chips. It can be applied at the temperature interval from -400C to +400C. The bottle has a spraying tube with a nozzle for convenient application. There are 6 holes located in a circle in the nozzle. These holes allow it to evenly and efficiently apply the compound on the hidden cavities. The drain hole on the back of the nozzle allows you to release excessive pressure and lubricate hard-to-reach parts and cavities. The flexible tube has an increased diameter which enables to use it even after mechanical impact (bending on 360). It returns to its initial form and stays serviceable. The tube is of enough length for the customer to cut it so that it is convenient to work on their car. Application: Remove loose rust from the surface. Dry the surface. Thoroughly shake the bottle and apply the product on the surface. Dry it again within 2 hours. Repeat if it is necessary. After the application is finished, turn the bottle upside down and blow down the spraying system by several rapid presses.