Anti-corrosive compound CRC 10.074.1.13.12.58

CRC GALVA BRITE Glossy anti-corrosive product (zinc aluminum primer). A protective zinc aluminum primer combines anti-corrosive properties with aluminum gloss. Excellent finishing coating for galvanized surfaces. It provides excellent protection of black metals from corrosion and rust. Galvanized properties of the product ensure cathodic protection (coating becomes anode). Galvanized surface is easily achieved by spraying the product with an aerosol. It does not contain lead and chromic acid. Aerosol, 400ml. It is under pressure of the flammable propellent CO2 which allows you to use the full bottle volume. Application: CRC GALVA BRITE Cars. Welded joints. Pipes and fittings. Land-based and shipboard equipment. Tank repair for storing liquified gas. Fencing, gates and parapets. Construction, domestic, gardening and farm equipment. Construction steel. And many other things. One-component zinc-aluminum coating combines anti-corrosive properties and aluminum gloss. GALVA BRITE is a mixture of zinc and aluminum powder, polymers and additives which forms an elastic protective film with bright gloss on the surface. Instructions for application: CRC GALVA BRITE. Remove the cap and release the applicator ball, thoroughly shake the bottle within one minute to ensure even surface coating. Continue shaking while using. To get the best results, apply on clean, dry, degreased surface. Rust and scale should be removed from the surface with a metal brush. Apply in even thin layers: to get the best result, apply two thin layers instead of one thick. Apply the next layers in 15 - 20 minutes. After the application is finished, clean the aerosol valve by holding the bottle upside down and pressing the valve until only empty gas is released from the bottle. If the hole is plugged, remove the valve and clean it with a thin wire. Do not use on working equipment. Apply only in well-ventilated rooms. Do not smoke and do not inhale the aerosol.