Ravenol Outboardoel 2T Full synth

It is made based on the mixture of polyesters and polyalphaolefins and a special ash-free additive package in Germany. The composition has been specially designed for modern outboard engines. It reliably protects the engine in extremely severe operation conditions. It is intended for use in modern two-stroke outboard gasoline engines operating on the gasoline-oil mixture. It is used in both oil injection and pre-mixing systems. The use of high-quality solvent in the oil ensures low flash point. It does not change the octane number of the gasoline-oil mixture in comparison with usual gasoline. The normal dosage of the mixture is from 1:75 to 1:100. However you should follow the engine manufacturer’s recommendations for the mixture dosage for each specific engine model. RAVENOL Outboardoel 2T Fullsynth. is blue-colored to avoid incorrect selection of the motor oil and determine presence of the oil in the fuel mixture. RAVENOL Outboardoel 2T Fullsynth. motor oil is officially tested and approved by: National Marine Manufacturers Association – TC-W3® License RL – 90001 G. It meets the following requirements: Yamaha; Mercury;Tohatsu; Johnson; Selva; Suzuki; Evinrude. Application. It ensures: excellent blending with all types of gasoline (leaded and unleaded) without a tendency to gel formation; combustion without any deposits and sediments on the spark plugs; prevention of soot and lacquer formation which disturbs heat removal from pistons and moving piston rings; application in the engines with oil injection and in the engines operating on gasoline-oil mixture; excellent engine cleanliness; reduction of noise in engine operation; reduction of smokiness in exhaust gases.