Ravenol Watercraft Full Synth 2-Takt

It is made in Germany and based on the blend of esters and polyalphaolefins. The composition has been specially designed for engines of modern personal watercrafts. It reliably protects engines in extremely severe operation conditions, including sudden short-term loads at the maximum revolutions of the engine. It is intended for use in modern two-stroke gasoline engines of personal watercrafts operating on the gasoline-oil mixture. It is used in both oil injection and pre-mixing systems. The use of high-quality solvent in the oil ensures low flash point. It does not change the octane number of the gasoline-oil mixture in comparison with usual gasoline. The normal dosage of the mixture is 1:100. However you should follow the engine manufacturer’s recommendations for the mixture dosage for each specific engine model. Compliance with the specifications: API TC+; ISO-EGD; ISO-EGC; JASO FC. It is officially tested and approved by: National Marine Manufacturers Association – TC-W3® License RL – 29019G. It meets the following requirements: BOMBARDIER; Rotax 253; Yamaha; KAWASAKI. Application. It ensures: excellent blending with all types of gasoline (leaded and unleaded) without a tendency to gel formation; combustion without any deposits and sediments on the spark plugs; prevention of soot and lacquer formation which disturbs heat removal from pistons and moving piston rings; application in the engines with oil injection and in the engines operating on gasoline-oil mixture; excellent engine cleanliness; reduction of noise in engine operation; reduction of smokiness in exhaust gases.