Petro-Canada Duron-E 15W-40

The product line of motor oils for severe conditions. DURON-E is made by Petro-Canada company and is a high-quality oil exceeding the current APICJ-4 requirements and can be used in low-emission engines meeting ’07 EPA requirements: the engines which apply modern methods of exhaust gas treatment, such as diesel particulate filters, diesel oxidation catalysts or without them, exhaust gas recirculation methods. The motor oils for severe conditions. DURON-E oils are suitable for diesel engines operating on the fuel with low and extra-low sulfur content. DURON–E can be used in older engines (produced before 2007) and where the oils meeting API CI-4Plus, CI-4, CH-4 are required. DURON-E are specially made of high-quality additives by the patented HT Purity Process Technology which enables to get the base oils refined on 99.9% - the cleanest base oils in the world. DURON-E formula is developed based on the most stringent oil quality standards for 4-stroke diesel and gasoline engines and is ideally suitable for the engines with the extended service intervals. The key factor for the extended oil change interval is the perfect technological process and maintenance, including the regular oil analysis. Contact Petro–Canada representative to get additional information. DURON-E 15W-40 has high soot dispersing and fuel saving properties which is typical for all DURON oils. It also has thermal stability required by ’07 EPA standard for the low-emission engines. It also shows very high performance in cold starting conditions, minimizes engine wear and oil consumption. It has the extended oil change interval (exceeds the standards intervals of equipment manufacturers)* in the most severe operation conditions. Gasoline and compressed natural gas engines. DURON-E 15W-40 exceeds the requirements to the motor oils for gasoline engines and can be used in the passenger cars and light trucks.