Pro-Line Diesel Partikelfilter Spulung Liqui Moly 5171

Diesel Particulate Filter Purge is a highly effective fluid used after Pro-Line diesel particulate filter cleaner. During the cleaning process particulate deposits are dissolved and distributed inside the diesel particle filter, to allow burn off. It is used without filter disassembly. The clogged filters are mainly observed on the vehicles operating on short distances. Frequency of Pro-Line cleaner and purge application depend on the operation mode of the vehicle. Regular application can significantly reduce operating costs. There is not necessity to replace the filter. Application. Cleaning is performed with the Pressurized Tank Spray Gun (part number 6226) and Pro-Line bended probe (part number 7947)) or Pro-Line straight probe (part number 7948). Align access to the filter depending on the type of the vehicle. To do it, in most vehicles, you should remove a pressure or temperature sensor of the filter. Insert the probe to the filter through the hole. The total amount of Pro-Line Diesel Particulate Filter Cleaner (1 liter) is sprayed directly onto the surface of the particulate filter in several intervals of 5 – 10 seconds with a break of 5 – 10 seconds in each case at an operating pressure of 6 – 8 bar. In order to coat the entire surface to the greatest possible extent, turn the probe and move it back and forth when cleaning.